KINEMATICS OF THE WORKING BODIES OF THE MECHANISM OF THE HINGE COUPLING AT DIFFERENT VALUES OF THE NUMBER OF INPUT LINK SPEEDS
DOI:
https://doi.org/10.17605/Keywords:
Articulated clutch, structural diagram, mechanism model, input and output links, law of motion, regression, angular velocity, gear ratio.Abstract
The laws of motion of the working bodies, consisting of three output links at different numerical values of the revolutions of the input link, are experimentally determined, and an interpolation cubic spline function of the law of motion is found using the Mathcad program. The first of the three working bodies is the output half-coupling, which circulates the liquid. The first-order numerical derivative obtained from its law of motion, that is, the variability of the angular velocity of the output half-coupling in one period shows that it operates in a non-stationary mode. The second and third output working links, consisting of telescopic rods, transmit rotational motion from the input link of the mechanism to the output link of the coupling half through the reciprocating movement of its piston, and at the same time act as a piston pump, accelerating the process of mixing the liquid, sucking and pumping them .
References
1.Barabash V.M., Abiev R.Sh., Kulov N.N. Review of works on the theory and practice of mixing // Theoretical foundations of chemical technology. 2018.Vol. 52. No. 4. P. 367-383.
2. Mudrov A.G. Designs and model of mixing in apparatuses with a stirrer // Izvestiya KGASU. 2018. No. 1 (43). S. 226-233.
3. Mudrov A.G., Mardanov R.Sh. Review of research on spatial mechanisms with rotary hinges // Theory of mechanisms and machines. 2015. Volume 13. No. 2 (26). S. 62-75.
4. Semenov Yu.A. Application of machines and mechanisms with internal inputs // Theory of mechanisms and machines. 2003. No. 1. S. 30-49.
5. Yarullin M.G., Mingazov M.R. Structural synthesis of a two-movable spatial 5R mechanism and elements of tracking control // Bulletin of the Samara Scientific Center of the Russian Academy of Sciences. 2014.Vol. 16.No. 6.P. 214-220.
6. Evgrafov A.N., Petrov G.N. Geometry and kinematics of the turbulent mixer mechanism // Modern mechanical engineering. Science and education. 2013.S. 701-708.
7. Yarullin M.G., Mingazov M.R. Kinematics of characteristic points of the working links of the spatial 4R-mechanism as an activator of mixing processes // Bulletin of ISTU. 2014. No. 3 (63). S. 34-38.
8. Mudrov A.G. Investigation of spatial mechanisms with a special structure // Bulletin of Kazan State Agrarian University. 2019. No. 2 (53). S. 111-116.
9. Semenov Yu.A., Semenova M.S. Features of the kinematic analysis of mechanisms with internal inputs // Theory of mechanisms and machines. 2004. Volume 2. No. 2. S. 30-39.
10. Ryazantsev D.A. Development of a system for measuring angular displacements // Measurement. Monitoring. Control. Control. - 2018. - No. 4 (26). - S. 5-9. - DOI 10.21685 / 2307-5538-2018-4-1.
11. Makarov E. Engineering calculations in Mathcad 15: Training course. - SPb .: Peter. 2011 .-- 400 p.
12. Matsyuk I.N., Tretyakov V.M., Shlyakhov E.M. Analytical kinematics of flat lever mechanisms of high classes using Mathcad // Theory of mechanisms and machines. 2012. Volume 10. No. 1. P. 65-70.
13. Ioffe M.L. On the choice of the parameters of the Bennett mechanism and its modeling in MATLAB // Bulletin of higher educational institutions. Mechanical engineering. 2016. No. 2 (671). S. 11-19.
14. Toshov B.R., Khamroev Sh.G. Stirring of liquids with a changing diameter of a mechanical stirrer // Collection of scientific works of BNTU. Minsk. 2019.Vol. 2.S. 197-203.
15. Toshov B.R., Khamzaev A.A., Khamroev Sh.G. Kinematics of the hinge coupling used in a mechanical mixer // Young Scientist. 2017. No. 1 (135). S. 89-95. 16. Toshov B. R., Hamroyev S. G. Suyuqliklarni aralashtirishda ishlatiladigan sharnirli mufta zvenolarining harakat qonunini aniqlash // Young Scientist 2020. No. 38 (328). S. 219 - 226.
