APPLICATION OF METHODS OF INCREASING THE QUANTITY OF FIBER OUTPUT DURING THE PROCESS OF SPINNING

Article Sidebar

pdf
Published: Feb 12, 2024
Keywords:
Lint, fiber, staple length, fluff, type, non-woven fabric, ripening, lintering, seed, grid, brush.

Main Article Content

Abzoirov Ortiq Xonimkulovich
Kushimov Azamat Abdurazzakovich
Xolmatov Shaxzod
Xolmatov Javoxir
Jizzakh Polytechnic Institute, Jizzakh, Uzbekistan
Apurba Das
PhD. Professor Indian Institute of Technology, Delhi, India

Abstract

In the process of separating the seeds, the raw material formed in the working chamber of the gin depends on the composition of the roller. This is due to the fact that the teeth of the rotating saw grab the fiber, attach the cotton to its back and make the roller with the raw material rotate, and the process of separating the seeds takes place in the working chamber.

Article Details

How to Cite
Abzoirov Ortiq Xonimkulovich, Kushimov Azamat Abdurazzakovich, Xolmatov Shaxzod, Xolmatov Javoxir, & Apurba Das. (2024). APPLICATION OF METHODS OF INCREASING THE QUANTITY OF FIBER OUTPUT DURING THE PROCESS OF SPINNING. Galaxy International Interdisciplinary Research Journal, 12(2), 222–225. Retrieved from https://internationaljournals.co.in/index.php/giirj/article/view/5225
Issue
Vol. 12 No. 2 (2024): GIIRJ
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Мирзиёев Ш.М. Буюк келажагимизни мард ва олижаноб халқимиз билан бирга қурамиз. Тошкент, “Ўзбекистон”, 2017 йил, 488 бет.

Мавлонов Т.М, Тиллаев М.Т. Тола ажратиш жараёнидаги чигитнинг ишчи камерасидан чиқиши. ЎзРФА “Фан” нашриёти. Механика муаммолари. Ўзбекистон журнали. Тошкент. 2000. №1. Б. 87-91.

Агзамов М. Снижение опушенности семян после пильного джинирования. Проблемы текстиля. 2006 №3. 22-24 стр.

Г. Ж. Жабборов. Чигитли пахтани ишлаш технологияси Тошкент. «Ўқитувчи». 1987 й. Б.84-92

К. Собиров. Самарадорлиги юқори, босқичма-босқич жинлаш ва линтерлаш технологик жараёнини ишлаб чиқиш. Техн. фан. докторлик диссертацияси, ТТЕСИ. 2008й. 341 б.

Kushimov A. A., Pokiza M. Determination Of Instant Values Of Angular Velocities Observed In The Process Of Operation Of A Feeder For Cotton-Sowing In A Two-Mesh Separator And Control Of Impacting Forces //Texas Journal of Engineering and Technology. – 2023. – Т. 18. – С. 42-45.

Kushimov A. A., Gadaev N. E., Gulbaev U. Y. O. Changes in the amount of contamination in the combed sliver and yarn during the spinning process //Science and Education. – 2021. – Т. 2. – №. 1. – С. 158-162.

Rustam M. et al. Principles of making pile of cotton cleaning machines from elastic material //Universum: технические науки. – 2022. – №. 10-6 (103). – С. 5-9.

Muradov R., Kushimov A. A., Mavluda Y. Theoretical and practical study of the process of cotton separation in mobile device //European Journal of Molecular & Clinical Medicine. – 2020. – Т. 7. – №. 6. – С. 3006-3015.

Hazratkulovich Y. K. et al. Improving the retention of free fibers in raw cotton and the separation of cotton from the air //Texas Journal of Multidisciplinary Studies. – 2022. – Т. 7. – С. 34-38.

Salomova M. et al. How to increase the effect radius of the cotton transport process in a mobile device //AIP Conference Proceedings. – AIP Publishing, 2023. – Т. 2789. – №. 1.